News:

;) This forum is the property of Proton software developers

Main Menu

A 3D Printed Enigma Machine!

Started by top204, Nov 12, 2026, 01:49 PM

Previous topic - Next topic

top204

I have just found something that I find amazing, and so cleverly devised and built. A 3D Printed Enigma Machine...

Its 3D print files site is here:

3D Printed Enigma machine

And its PCB gerbers are here:

https://github.com/jesus-cf/3D-Printed-Enigma-PCBs

Regards
Les




ken_k

#1
Last month I had the pleasure of meeting Bruce Donnelly from Dimboola Vintage. Bruce demonstrated his Enigma machine to me, it worked very well. If any one is driving from Melbourne to Adelaide it is well worth stopping at Dimboola. Bruce is a most interesting person he makes all sorts of  devices. After a long time talking about "things" and our builds he gifted me an unrestored geiger counter after I showed him one of my PIC powered  50's sci-fi inspired geiger counters, lots of radium glass and thorium mantles in the shop for testing. 

https://www.facebook.com/photo?fbid=4027128444086801&set=pcb.4027137024085943

Bruce convinced me I need a laser engraver.



top204

He sounds like a really good person to talk too, and certainly has my interests in his hobby.

I also made a small Geiger counter, back in the early 2000s Ken, and also bought some raw uranium granite rock, from the south west of England, and it works a treat!

I have a K40 IR laser cutter/engraver, but it is too large and needs too much venting, so it is still in its cardboard packing that my Rachel did on it when we moved house, so it will probably never get used, and, even when working, it will not engrave or cut copper, so it is of limited use to me.

What I always wanted was a YAG laser, that emits ultraviolet laser light and can cut metals, but they are ridiculously high prices, and I think they now call them fibre lasers. So I certainly will never have one, but one can dream of cutting PCBs with a laser in 4 passes. i.e. Cut the PCB holes with the laser, then run the PCB through my 'through hole plating' mechanism I created, on the bench. then put it back on the laser and cut the tracks in a few seconds, then turn it over and do the same on the other side of the PCB, and within an hour, a full double sided, through hole plated PCB is created. :-)

I really hope you get your engraver Ken, but make sure it is not IR, if certain metals are what you want to engrave. You need high powered IR, and they are quite large, but YAG or fibre and small and seem perfect for the task, but crazy expensive. :-)

Regards
Les

▲