FT800/FT810

[Alex C.]

Hello, anyone has ever used ft800 / ft810 ftdi?
Having any examples?
Thanks Alex

[John Drew]

Is that Yaesu?

[OG]

I think he's talking about that.

http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT800.pdf 
https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT81x.pdf

[top204]

They are a good concept, but they are waaaaaayyyyy over priced for what they are and do.

[RGV250]

Hi,
I had it working and there was some stuff on the old forum, it is late here so give me a day or two and I will see what I have. I think the 810 is for capacitive touch screens, I only used the 800.
I was getting on very well with it until a person left and I am not sure what happened but I never got any sensible answers.

Regards,
Bob

[HAL]

FTDI - do they also make usb chips?

[RGV250]

Hi Alex,
This is what I can find at the moment, probably got other stuff but it will be before "Procedures".
I hope it gives you a start as it did take a bit of time to actually get it to work,
This one is a bit more involved than a basic "Hello World", if you have any issues let me know and I will see what I can do.
It is written for 18F2680 but if you comment out the device include and add the Amicus18 it should run on the 18F25K20/Amicus18 board.
RGV_Display.zip

Regards,
Bob

[Alex C.]

62 / 5000
Risultati della traduzione
Thank you very kind Bob. I'll let you know if I have any problems.
Alex

[Alex C.]

This is what I would like to buy. https://www.hotmcu.com/5-graphical-lcd-touchscreen-480x272-spi-ft800-p-124.html
I ask Bob one thing, is the display update system fast enough?
Alex

[RGV250]

Hi,
I did have a video of a simulated revcounter, unfortunately some incompetent programmer at Samsung has screwed up access to my cloud storage where I think it is.
I cannot believe it asks for 2 factor authentication so I log in and then it says it cannot send an email to verify it is me although I have just done that.

As I recall it was pretty quick updating.

Bob

[RGV250]

I hope this comes out, I am not sure if it is from the earlier attached code but it will give you some idea. Looks better on the actual device than the video here.
Revcounter.zip

Regards,
Bob

[TimB]

Looks a very interesting solution for a future project

Thanks

[RGV250]

Hi Alex,
I had some issues converting that code to PIC24 and went back to basics to try to see where I was going wrong. Long story short, I could not get that code to work reliably. It was written 6/7 years ago and may be subject to improvements in the compiler causing issues??
I am rewriting it to benefit from procedures so I will post an update if you would like to test is shortly.

Regards,
Bob 

[okmn]

guys .you can use dwin hmi lcd screen
K600 seriies and t5l seriies(for usb camera)
first do your all special pictures by adobe or others  and download all picrures to the internal flash of dwin lcd then call them with your mcu ttl level uart

you will use "dgus" software for hmi configiration of yor ready pictures
video teaching for k600 and t5l series
http://forum.dwin.com.cn/forum.php?mod=forumdisplay&fid=121

i am using it and they are so good ;
http://dwin.com.cn/home/English/index.html
http://dwin.com.cn/service/en/file/id/13
http://forum.dwin.com.cn/