help with the Operation LED panel 16x32 scan 1/4 P10 - hub75

[jam19857]

I already tried with bits[RowGroup] = ~ ZeroBit but it doesn't work, it works with bits[RowGroup] = 1 - Zerobit; that strange because both make the complement

[Pepe]

The ~ does not work in bit variable because there is an error in the compiler that would have to check Les.I already report anomaly

[Pepe]

Example for Aquino969
added Context Save PRODL,PRODH ,FSR0L,FSR0H ,INDF0
Corrected library and fonts

[aquino969]

I LOVE YOU PEPE

[Pepe]

Proteus demo with the Panel10 Fixed Library

[aquino969]

Thanks a lot Pepe.
you are a good person...

To add more than one p10, I increase the number of modules from (Panel P10n.inc).
I connected three modules.

also i don't want to use expensive processors for small programs.

for example how would a solution for 16f1827...

[Pepe]

Unable to use the 16f1827 because it does not have enough ram

[Pepe]

New P10 library for more than one module with simulation in proteus

[Pepe]

Example for Aquino969 for 2 panels

[ik0sit]

Transitioning code between different IDEs can sometimes be a bit tricky, but it sounds like you're making progress. I know good sources for researche are a must but I don't have a good base so if there is anyone here that has a good platfroms where I could learn more about lights, please share them here!!

[gtvpic]

Transitioning code between different IDEs can definitely be a bit of a puzzle, but hey, sounds like you're figuring it out! As for learning more about lights, I totally get it - it's hard finding solid sources without feeling like you're being sold something. Personally, I've been using this website called leds.to for a while now. They've got loads of helpful articles and product recommendations, and what's cool is you can learn without feeling the pressure to buy anything right away.

[rick.curl]

Unable to use the 16f1827 because it does not have enough ram

Take a look at the "K" series, like the 18F24K40.  Costs less, has more RAM, more flash, more pins, runs faster.
-Rick